If the bearings are now oiled, the shaft should
turn easily and smoothly. Fasten a pulley 4 or 6 in. in diameter
to the longest arm of the shaft.
Connect the nozzle to a water faucet by means of a piece of hose;
place the outlet over a drain, and belt the motor direct to the
washing-machine, sewing machine, ice-cream freezer, drill press,
dynamo or any other machinery requiring not more than 1/2 hp.
This motor has been in use in our house for two years in all of
the above ways, and has never once failed to give perfect
satisfaction. It is obvious that, had the wheel and paddles been
made of brass, it would be more durable, but as it would have cost
several times as much, it is a question whether it would be more
economical in the end. If sheet-iron is used, a coat of heavy
paint would prevent rust and therefore prolong the life of the
motor. The motor will soon pay for itself in the saving of laundry
bills. We used to spend $1 a month to have just my husband's
overalls done at the laundry, but now I put them in the machine,
start the motor, and leave them for an hour or so. At the end of
this time they are perfectly clean, and I have noticed that they
wear twice as long as when I sent them to the laundry.
Pages:
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173