thick, 22 in. wide and 42 in.
long, with the four sides surfaced, squared and sandpapered the
same as for the top.
For the side rails, order 2 pieces 7/8 in. thick, 6 in. wide and
37 in. long, S-4-S and sanded on one side. For the end rails, 2
pieces 7/8 in. thick, 6 in. wide and 25 in. long. Other
specifications as for the side rails.
For the stretchers, into which the shelf tenons enter, 2 pieces
1-1/8 in. thick,
[Illustration: This Picture Is from a Photograph of the Mission
Table Described]
3-3/4 in. wide and 25 in. long, surfaced and sanded on four sides.
For the slats, 10 pieces 5/88 in. thick, 1-1/2 in. wide and 17 in.
long, surfaced and sanded on four sides. For the keys, 4 pieces
3/4 in. thick, 1-1/4 in. wide and 2-7/8 in. long, S-4-S. This
width is a little wide; it will allow the key to be shaped as
desired.
The drawings obviate any necessity for going into detail in the
[Illustration: Table Details]
description. Fig. 1 gives an assembly drawing showing the relation
of the parts. Fig. 2 gives the detail of an end. The tenons for
the side rails are laid off and the mortises placed in the post as
are those on the end.
Pages:
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350