Whatever shape is used, the important thing
to keep in mind is that the size of the key and the slant of its
forward surface where it passes through the tenon must be kept the
same as the mortise made for it in the tenon.
The top is to be fastened to the rails by means either of wooden
buttons, Fig. 4, or small angle irons.
There are a bewildering number of mission finishes upon the
market. A very satisfactory one is obtained by applying a coat of
brown Flemish water stain, diluted by the addition of water in the
proportion of 2 parts water to 1 part stain. When this has dried,
sand with number 00 paper, being careful not to "cut through."
Next, apply a coat of dark brown filler; the directions for doing
this will be found upon the can in which the filler is bought. One
coat usually suffices. However, if an especially smooth surface is
desired a second coat may be applied in a similar manner.
After the filler has hardened, a very thin coat of shellac is to
be put on. When this has dried, it should be sanded lightly and
then one or two coats of wax should be properly applied and
polished.
Pages:
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353